High Precision ER Milling Chuck Set
ER milling chuck paro est summus praecisio collet monax, colles ver-onusti sunt, ut amplitudines comprehendere possint.Haec monax fixa perfecta est ad usum cum molendinis et aliis machinis subtilitatis.
| Ordo No. | Foraminis Size | PCS/SET | |
| digitis | mm | ||
| ER16-8in(mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6in(mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10in(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6in(mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12in(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8in(mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15in(mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Thread of Contrahe Bar
| Cereus collet monax | Sera ducatur talea | |
| R8 | 7/16＂-20UNF | |
| 7:24 30 | M12×1.75 | 1/2＂-13UNC |
| 7:24 40 | M16×2.0 | 5/8＂-11UNC |
| 7:24. | M24×3.0 | 1＂-8UNC |
| MS2 | M10×1.5 | 3/8＂-16UNC |
| MS3 | M12×1.75 | 1/2＂-13UNC |
| MS4 | M16×2.0 | 5/8＂-11UNC |
| MS5 | M20×2.5 | 3/4＂-10UNC |
| MS6 | M24×3.0 | 1 -8UNC |
Quaeso certiorem stamina collet chuck vectem trahere et specificationem colletarum (metrica vel inch)
Quaeso notum longitudinem dia et scapus rectum.
Colletas et chuckes diversis scapus et quantitatibus, secundum exigentiam tuam, libenter suppeditare.
